Accessory Parts

Back in the office!
Happy New Year!

The finest trim, accessory, and lighting that exists for your early 911 or 912. All our own production!

Craftsmanship and attention to the smallest details are our hallmarks....
We also make a few parts for the 356's as well..

Purchases directly, just email us, or from our eBay site (button below)
For sales outside the USA please email us
Sorry, no shipping to Mexico or Norway at this time
[email protected]
206 321-2960

EBay

CIBIE BI-IODES, INQUIRE...

mANY PEOPLE HAVE SAID THAT OUR PARTS LOOK LIKE ART... WE AGREE!

SWB Horn grills, steel alloy (ours exclusively), in stock!

This is our 3rd run of these in the last 15 years. They fit perfectly and the chrome is stunning.. truly Concours!

NOT plastic!

$270 per pair if you reach out to me directly (and no taxes), slightly higher on eBay.

Just received these from our local plating shop, Made in the USA.
These are "quad" chromed, which mean first copper, then 2 layers of nickle and then chrome. Perfect fit, this is our 3rd run of these, includes a correct seal and screws. 1966-1968 911 and 912.
901.559.432.23
901.559.431.23
901-559-431-23
901-559-432-23
90155943123
90155943223

LWB HORN GRILLS BACK in stock!

Made in the USA, quad chromed alloy steel (copper, duplex nickle, and then chrome), and they FIT unlike the others out there!!

$270 per pair when you contact us directly.

Hella thru grill lighting for swb cars... 66-68.

Lighting made in Europe, glass Hella logo lenses made in Germany, the grills are the same ones I've been making for over a decade.. flawless chrome, made in the USA. Includes the brackets, and also includes a pair of Hella lamp covers. Note the inside of the lighting has all the correct Hella and DOT stamping as well at the bottom of the bracket, and the back of the reflectors the factory stamping also. 5 rivets as are correct for the Porsche version of the 118.

The brackets the lights have includes the extensions needed to "clear" the horn grills, and the bolt used to tighten the base bracket is a hex head that goes into a weldnut such that you don't need 3 hands to tighten the light.
Clear fog lamps, includes lights, brackets, grills, seals/fasteners, and lamp covers (as seen above). Sorry, no yellow reflector or yellow lenses available, and we don't have driving lights left either.
contact us on availability

HELLA 128 CLEAR FOG LAMPS BACK IN STOCK!

Finally back in stock! Correct Logo'd glass (german) lamps, H3 bulbs included, and flawless chrome. Price for the pair is $375 plus shipping. Slightly higher on eBay, just reach out to us directly!!

65-67 usa headlight assemblies

New reproduction of the original Hella headlights for the early USA cars. Part # 901.631.102.01

These have been unavailable for many years. Use with standard 7" USA Sealed beam bulbs, or drop in a pair of 7" Hella H4's, Cibie Bi-iodes, or your favorite LED lighting like the J.W.Speaker lights.
We used brass for the trim ring, which is then chrome plated just like OEM. We didn't just use stamped steel which rusts....and doesn't fit well.

Correct screws with oval head, not just flat head machine screws... and they are chrome plated.

Bucket is powdercoated in the correct shade of gray and has a copy of the Hella date stamp as well

Raised script on the glass (sorry no Hella logo), correct SB 19-20-21 script and we used a special glass type called "Borosilicate"... it's stronger than standard glass and will resist rock chips and breakage better than the standard glass!
Complete with the bulb springs, and the correct attachment screw.
Take a close-up look at the pictures for all the details.
Perfect fit right out of the box, just install your own 7" bulbs, plug, and play!

$585 for a pair, plus shipping

square end 911 muffler tips are back!

Available now. I've done my due diligence. They are spec'd to the new Porsche Classic muffler, pics of my tip on that muffler above. Spec is 61.25 mm. For 1965 to 1973 911 (not correct for 912)

Made from brass (just like oem) and then chrome plated (locally). Correct angle on the "slice" so it fits up to the curve. OEM part number 901.111.245.01

Price is $115 plus shipping, which is $10 in the Continental USA.
Shoot me an email for an invoice, no taxes. eBay will be higher....
[email protected]

128 Amber reflector FOG LIGHTS
OUR OWN PRODUCTION...

For 356 B and C cars, and early SWB 911 cars from 1965 to 1968
Concours quality chrome, correct raised lettering and logo.
These are not the same lights offered by others, these are our own production and are beautiful quality, with absolutely flawless concours chrome!

Bulb included, either 6v or 12v.

Correctly made w/ amber reflector
$760 per pair

Peanut headrest, 72-73, standard and sport seats, and all recaro bucket seats

Currently unavailable

recaro racing bucket tip bracket

Tip brackets for the Recaro racing buckets, or similar type of seats like what Vintage Seats offers.

$385 each, higher on eBay.

H1 headlights

New reproduction of the iconic dual reflector H1 headlight. Part # 911.631.101.00
Think LED lighting is bright? Left picture is these H1's with only 55 watt bulbs on High Beam at night!!....
Over 3 years in development to get all the details correct.

We used brass for the trim ring, which is then chrome plated just like OEM. We didn't just use stamped steel which rusts....
Correct screws with oval head, not just flat head machine screws...
Raised script on the glass (sorry no Bosch logo), and we used a special glass type called "Borosilicate", trade name is Pyrex... it's stronger than standard glass and will resist rock chips and breakage better than the standard glass as well!

Complete with bulbs, and the correct attachment screw.

Perfect fit right out of the box, just plug and play!

Sold as a pair. $755 when ordering direct!

rear bumper endcaps

Back in stock!

Correct for 1965-1968

Includes the seal and attachment hardware.

Sold as a pair, $92.50

901.505.252.20
901.505.251.20

1966 - 1967 Window washer bottle, the "correct" size!

NEW production of the washer bottle for 1966 and 1967 for all 911's.

This is the CORRECT size washer bottle, and is not the same as the "other" one being offered elsewhere.

Entirely new tooling, correct strainer, and strainer tip color. Also has correct surface texture and snap lid, and the original logo as well! Note the attachment points have the correct plastic washer so you don't have to order them separately.
$125
901.628.720.22

Early window washer bag

1964 to early 1966 Windshield washer reservoir, correct for all early 911's with the hole behind the shock tower.

Correct in all aspects including strainer tube sleeve and blue strainer tip

In stock, $125
901.628.720.20

Rubber bumper insert for 67S, 68S, and 68L

1967S, 1968S, and 1968L correct "wide" rubber bumper insert for either front or rear. One piece molded "bullnose" end. For rear fitment simply cut to fit.
901.505.405.50
Currently not available

Late 1965 through 1967 911 Rubber parking brake boot

The leather brake boot continued into late 1965 when it was replaced by this boot. It has no slits in it like the later 1968+ boot (listed below). All correct molding seams. Fits correctly under your carpet or rubber tunnel mat.

$29.50

1968 to 1974 911 rubber parking brake boot

Finally an option to the later model boot for the early cars!
This one is absolutely correct for 1968 to 1974 911's. All correct molding seams and fits under your rubber tunnel mat or carpet.
Molded slits for the throttle and heat levers.
$29.50

Spark plug wrench 1965 to 1968, 10mm and 12mm

Correct reproduction of the very hard to find spark plug wrench for mid 1965 to 1968 SWB cars in 10mm hex head.

Absolutely correct details and finish.

Also available in 12mm version for 1964 and very early 1965 SWB cars.

$195 for 10mm, $95 for 12mm

Headlight attachment screws for 65-67 Euro and USA and H4 and H1 headlight assemblies.

,
This is the factory style headlight screw for the 65-67 USA and Euro headlight assembly.
It's also the factory style headight screw for the chrome trim ring H4 and H1.
901.631.119.00
901-631-119-00
$14 each, sorry not on eBay.

Headlight adjusting screws for 56-65 356's and early SWB 64-68 911's.

Headlight adjusting screws, for early SWB cars to 1968 and 4 cylinder cars 1956 to 1965.
65mm length, pilot tip, correct brass with chrome plate.
7mm oval head, same size as original.

$20 pack of 4, sorry not on eBay

ORIGINAL SWF STYLE WIPER ARMS AND BLADES FOR 1965 TO 1967 911 SWB CARS, ... $110 for a full set of arms and blades

SWF style Wiper Arms for 1965 to 1967 911 SWB cars

Correct reproduction of the original SWF wiper arms, painted in silver. Each arm is "handed" so that these are correct for either left or right hand drive (just like the originals were).
Currently not available separately... only as a set with blades.
901.628.930.00
901-628-930-00
901.628.929.00
901-628-929-00

Wiper Blades for 1965 to 1967

Perfect reproduction of the original SWF silver wiper blades for 1965 to 1967 911's.
Note that we are the ONLY place to get this correct blade....
901.628.311.01
901-628-311-01

$60 a pair.

Wiper Blades for 1968 to 1977, Perfect SWF reproduction. Correct for 914 and 914/6 as well

Exact reproduction of the wiper blades that came on your 1968 to 1977 911 car. If you're going to put on new blades, why not put on the correct ones

These are also the correct blades for the 914 and 914/6

In stock, $50 per pair

Wiper Arms for 1968 to 1977, 911, and 914 Exact SWF reproduction. In stock!! $60 a pair.

Note the arc in the arm! exClusively ours!!

FActory style roof racks in black powder coat. fits 1965 to 1994!

Original style racks, a few pieces back in stock in black powdercoat! Sorry no chrome available.
$1150 plus shipping...

1967S interior door handle bezels

Another perfect reproduction. These are done in stainless steel and then chromed, just like the factory did. Includes black attachment grommet.

We have a couple of pairs available, $580 per pair, including correct grommet. Armrest not included....
Part nos,
901.559.495.50 or 901-559-495-50
901.559.496.50 or 901-559-496-50

356 GT interior door handles!

Reproduction of the GT door handles used on late A cars, Special order GT cars.
Die cast just like the originals, perfect chrome, and include the roll pin.

Pic shows the difference in size between the GT handles and the standard size.

$140 for the pair, and includes the "roll pin"

Limited availability of a new production run of the very rare picklefork wiper arms and blades.

Correct for 1956 to 1958 Speedster, 220mm(+/-) arm length (slightly adjustable).

Blades are 260mm in length, and have the correct "christmas tree" profile of the rubber

Created using entirely new tooling, and have the correct 2 slotted screw attachment point on the arm, with no 3rd "hole" in the base.

$435 for a full set, when available. Please inquire.

Picklefork wiper arms and blades, correct for 1956 to 1959 Coupe, Cab, ConvD, 240mm(+/-) arm length (slightly adjustable).

Blades are 260mm in length, and have the correct "christmas tree" profile of the rubber

All new tooling was used to make these.

$435 for a full set, when available. Please inquire.

Disclaimer: We don't sell to JP Dansk, Sierra Madre, Stoddard, Sportwagen Eckert, Pelican Parts, Rose Passion, Partworks.de Carpoint.de (out of business?), AASE (out of business?), etc. They are not authorized retailers of our products. We will not honor any claims or warranty adjustments from these retailers. Any products that looks similar to our products from these retailers are not ours, or are 3rd party distribution which will not be honored for warranty or claims. The use of the Porsche name, 911, or 912, is only to identify the relevant parts uses, and not any association with Porsche AG or PCNA.